The Meters tab lets you control Trash's squash meters.
| Squash Meter Options | |
| Enable histogram | Turns on or off the level histogram meter. |
| Enable gain reduction meter | Turns on or off the gain reduction meter. |
| Source | Sets the source for the gain reduction meter. Comp/Lim displays the amount that the compressor and/or limiter is reducing for that band. Exp sets the readout to be the amount the expander/gate section is reducing for that band. Note that this meter only shows gain reduction. If you have the expander set to "upward compress" the level with a ratio less than one this meter will not show the amount that the signal is amplified. |
| Show peak hold |
Turns on or off the peak hold for the gain reduction meter. |
| Peak hold time | Allows you to set the peak hold time for the peaks of the gain reduction meter. |
| Enable curve level meter | Allows you to turn on or off the dynamics curve level meter. |
Note: This help file is a quick reference for basic Trash functions and controls. We have separate "how to" guides that provide tips and techniques for getting the most out of Trash. You can download these guides from http://www.izotope.com/products/audio/trash/guides.html