Alt+click:
If you Alt+click on the "active" light of a module on the faceplate, that module is made active and all other modules are bypassed.
If you Alt+click on the mute ("M") button of a multiband that band is solo'ed.
Wheel Mouse Notes:
If you have a wheel mouse, you can adjust most controls (I/O gain, sliders, etc.) by simply positioning the mouse cursor over the control and rolling the wheel. If the wheel has no effect, try clicking on the plugin to make sure Trash has the keyboard focus.
In the filter modules you can adjust the Q or resonance (hold Ctrl to select which) of a selected band with the wheel.
In the History screen, you can use the wheel to scroll through the History list.
Mouse and
Meters:
Zoom in and out on level histograms by holding down the Ctrl key under Windows or the Command key under OS X and clicking with the left mouse button to zoom in or the right mouse button to zoom out. Under OS X you can also Command-ctrl-click to zoom out.
Reset the peaks or averaging of the spectrum by clicking on the spectrum.
Reset a meter's peak indication by clicking on it. You can also reset a level meter's clipping indicator by clicking on the clipping indicator (the red "over" light at the top).
Copy/Paste Support:
Right-click (under OS X you can also ctrl-click) on any slider to bring up a context menu allowing you to copy and paste its value. You can copy/paste between sliders, even if the sliders are in different instances of the plugin. You can also copy/paste between a slider and a text editor such as Notepad in order to see the slider's value to a much higher precision than the plugin displays.
Shortcut Keys:
| Front Panel | |
| Ctrl + 1 through 6 | Display each of the six Trash module screens with the Ctrl key in combination with the 1-6 keys. |
| Ctrl + Shift + 1 through 5 |
Displays options dialogs: 1: General Options |
| Ctrl + P | Opens the preset system dialog box. |
| Ctrl + B | Toggles bypass for all Trash processing. |
| Modules | |
| Tab and Shift Tab | Select the next or previous control. You can also select a control by clicking on it with the mouse. To select a slider without moving it, click on the slider label. |
| Home and End | Set the value of the selected control to its lowest or highest value, respectively. |
| Arrow keys | Turn the selected control up or down. Use with Shift key for larger increments. You can select a control by clicking on it. To select a slider without moving it, click on the slider label. |
| Page Up and Page Down | Turn the selected control up or down in larger steps. Use with Shift key for larger increments. |
| Enter | Toggle the value of a checkbox or button control if selected, or enter numeric entry mode if a fader is selected. |
| Direct Entry | Note that you can enter a numeric value directly for a selected control by clicking on the numeric value label, entering a new number, and pressing the Enter key. |
| Filters | |
| Alt+click |
Apply a bandpass filter at the mouse cursor to "solo" the frequencies under the cursor |
| Shift+click |
Constrain mouse movements (dragging an EQ band) in either the vertical or horizontal direction. |
| Double click | Double click on a band to reset it to its default position. |
| Left/Right arrow keys | Adjust the frequency of a selected band or bands. Use with Shift key for larger increments. |
| Up/Down arrow keys | Adjust the gain of a selected band or bands. Use with Shift key for larger increments. |
| Ctrl + arrow keys | Adjust the Q or resonance of the selected band. Use with Shift key for larger increments. |
| Alt + arrow keys | Select the next or previous node. |
| Input/Output Gain | |
|
Ctrl + - |
Increase the left and right input gain. Use with Shift key for larger increments |
|
Ctrl + [ |
Decrease the left and right input gain. Use with Shift key for larger increments |
|
Ctrl + ; |
Increase the left and right output gain. Use with Shift key for larger increments |
|
Ctrl + . |
Decrease the left and right output gain. Use with Shift key for larger increments |
|
Ctrl + , |
Toggle locking the left and right input or output gains |
| Misc | |
| Ctrl + Z | Undo the last change made to a control. |
| Ctrl + Y | Redo the last change made to a control. |
| Alt + 0 through 9 or Ctrl + Alt + 0 through 9 | Set the opacity/transparency of the Trash UI. Alt+0 is fully opaque (not transparent at all). After that, Alt+1 through 9 set increasing levels of opacity. |
| Esc | Cancels dialog boxes. |
| F1 | Displays help file. |
Note: This help file is a quick reference for basic Trash functions and controls. We have separate "how to" guides that provide tips and techniques for getting the most out of Trash. You can download these guides from http://www.izotope.com/products/audio/trash/guides.html